Nam Son - Optimal integrated laser solution for businesses
Laser Gantry Engraving Epilog Mini is a mini laser marking machine equipped with a series of features of automatic focus laser marking machine, pneumatic assist, integrated vacuum cutting table, etc. With the high-quality motion control system and the most included user-friendly features on the market, it is the number one choice for engravers worldwide.
Laser power options, large working area
Power choices of up to 80 watts, large engraving area of 24″” x 18″” x 8.5″” (610 x 457 x 215.9 mm), and Radiance High Definition Optics combine to make the Epilog MINI our most popular choice for engravers worldwide. The MINI will allow you to produce deeper, faster engraving and cutting results than ever before.
Accupoint™ High Speed Servo Motors
The Epilog MINI series is equipped with Servo motors and Accupoint™ Motion Control System that will provide high precision cutting and engraving at extremely fast speeds.
CO2 Waveguide laser tube produces the best beam quality
The patented CO2 Waveguide laser tubes used in Epilog’s laser systems produce the best beam quality in the industry. With higher CO2 gas pressure, less stringent mirror alignment requirements, faster switching rates and smaller bore, Epilog’s laser tubes provide the highest-quality engraving and cutting results available.
Long Life Lenses
The Epilog MINI Laser uses ZnSe lenses and single crystal silicon mirrors rated to over 500 watts. The front-mounted mirrors can be easily removed and replaced without affecting beam alignment.
Memory in the Machine
Improve job processing times and workflow with integrated on board 64MB of RAM in the legend laser machines.
Easy Cleanup with the Removable Crumb Tray
We’ve designed the Legend series for easy cleanup with an integrated crumb tray. Simply remove the crumb tray and dispose of the debris after laser cutting.
Engraving and Cutting
Now you can engrave wine bottles, mugs, glasses, flashlights or any other cylindrical item on the Epilog MINI Laser. So intuitive and easy to use, you can switch from one glass to the next in seconds – without even removing the attachment from the engraver. In addition, the machine also provides the correct aspect ratio, so no need to enter diameter or circumference calculations.
PhotoLaser Plus takes photo engraving with your Legend Epilog Siries laser to the next level by easily processing photos for engraving on all types of materials.Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings.
Raise and support your cutting materials for better edge quality. The Pin Table incorporates movable pins that can be placed anywhere along the table’s grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handy removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table.
|Tên tài liệu||Xem tài liệu|
|Catalogue_Epilog_EN (Mini)||TẢI XUỐNG|
Thank for your attention to LASER GANTRY ENGRAVING EPILOG MINI. If you need get a quote, please fill in the form bellow & send it to us. We will respond within 24 hours.
If you have any question,
please fill in the form in the right
& send it to us.
We will respond to you in the shortest time.