Warning: Invalid argument supplied for foreach() in /home/admin/domains/namson.com.vn/public_html/wp-content/themes/namson/single-san-pham.php on line 21


The Fusion Edge laser gantry machine series takes our highest-quality engraving technology and incorporates it into smaller-format systems which allow customers to get the latest technology in a transportable format.



Laser cutting / laser micro cutting
Laser engraving




The Fusion Edge laser gantry machine series takes our highest-quality engraving technology and incorporates it into smaller-format systems which allow customers to get the latest technology in a transportable format. The Fusion Edge machines feature a touch-screen display panel, on-screen artwork positioning with our IRIS™ camera system, and job trace functionality for quick and easy artwork setup.


Highest-Speed Engraving

The Fusion Edge’s 120 IPS (3.05 m/s) engraving speed and 5G acceleration provide the fastest engraving in the industry in a compact format.

IRIS™ Camera Positioning

An overhead camera system provides a real-time picture of the working area for accurate artwork placement. Drag and drop your artwork on screen for the fastest work processing.

Laser Fusion Edge touchscreen controls

Select between jobs, auto focus the laser, and rerun jobs at the touch of a button from the easy-to-use touch screen interface right at the laser.

Engineered and Manufactured in the USA

Proudly designed, engineered, and manufactured in our Golden, CO headquarters at the base of the Rocky Mountains.

Ethernet, USB, and Wireless connections 

The Fusion Edge features built-in Ethernet, USB, and Wireless options for networking your laser.


Keep the mechanics of your laser machine cleaner than ever before with side enclosures, a fully covered x-axis assembly, and covered lens assembly.

Air Assist

The air assist directs air right at the cutting surface to remove heat and combustible gases from the point of laser contact, providing a cleaner cut.

Radiance™ Beam Enhancing Optics

No additional, expensive lens package needed for the highest resolution engraving across the entire table.

CO2 Waveguide Laser Tubes by Epilog

Metal/ceramic tube design provides higher beam quality and longer life with low recharge costs.

1 GB Memory in the Machine

Improve job management and data integrity with 1GB of RAM. Save your most run jobs right at the laser.

Long-Life Steel Bearing

A dual block design provides the most rigidity and reduced vibration without the inevitable wobble and replacement of plastic bearings.


Fusion Edge 12Fusion Edge 24Fusion Edge 36
Work Area24” x 12”
(610 x 305 mm)
24” x 24”
(610 x 610 mm)
36” x 24”
(914 x 610 mm)
Maximum Z-Depth7” (178 mm)10” (254 mm)10” (254 mm)
Laser Tube WattageCO2 – 30, 40, 50, or 60 watts

  • air-cooled, metal/ceramic tube, 10.6 micrometers

– OR –

Fiber – 30 watts

  • air-cooled, includes collimator, 1064 nm, Beam quality: M2 < 1.1
CO2 – 40, 50, or 60 watts

  • air-cooled, metal/ceramic tube, 10.6 micrometers
CO2 – 50 or 60 watts

  • air-cooled, metal/ceramic tube, 10.6 micrometers
SoftwareEpilog Laser Software Suite: Laser Dashboard™ & Epilog Job Manager™
MemoryMultiple files, up to 1 GB total. Engrave any file size.
Operating ModesOptimized Raster, Vector, and Combined modes
Motion ControlHigh-speed, continuous-loop, brushless DC servo motors using rotary encoding technology for precise positioning
X-Axis BearingsGround & polished stainless steel, Teflon-coated, self-lubricating bearings.
BeltsAdvanced B-style double-wide Kevlar precision drive belts.
ResolutionFully-flexible and user-controlled from 75 – 1200 dpi
Optional Lenses1.5″ or 4.0″
Speed and Power120 IPS (3.05m/s) with 5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, and Raster/Vector mode.
Print InterfaceUSB, Wireless, and 10Base-T Ethernet. Windows 7/8/10 compatible.
Size (W x D x H)39.5” x 26.5” x 17.9″
1003 x 673 x 455 mm
41.52” x 32.81” x 38.04″
1055 x 834 x 967 mm
53.52” x 32.81” x 38.04″
1359 x 834 x 967 mm
Weight138 lbs (63 kg)225 lbs (102 kg)260 lbs (117 kg)
Electrical110 to 240 volts, 50 or 60 Hz, single phase
Ventilation350-400 CFM (595-680 m3/hr) external exhaust to outside or internal filtration unit required. One output port, 4″ (102 mm) diameter.
SafetyClass 2 Laser Product – 1 mW CW MAXIMUM 600 – 700 nm

Technical specifications and product configurations subject to change without notice.


3-Jaw Chuck Rotary Attachment (Coming Soon)

With the 3-Jaw Chuck rotary, objects are clamped into the device’s 3-jaw chuck, allowing you to rotate cylindrical or oddly-shaped items in applications that demand more precise alignment.


Additional Fusion Edge Lens Options (Coming Soon)

In addition to the 2.0″ lens, we offer special lenses for specific applications.

1.5″ Lens: Highest-Resolution Engraving (Coming Soon)

Although the standard 2.0 inch lens provides amazing detail, our 1.5-inch lens assembly is designed for the highest-resolution engraving and etching of extremely small fonts.

4.0″ Lens: Cutting Thicker Materials and Inside Deep Areas (Coming Soon)

The 4.0 inch lens produces a focused beam over a longer vertical distance, which makes it ideal when engraving within a recessed area of a product, such as inside a bowl or plate. The lens is also used for cutting through very thick materials.

Air Assist Pump

Blows a constant stream of air on the cutting area. Epilog’s optional Air Assist Pump is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area.

This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

Fusion Edge 12 Stand (Coming Soon)

An easy-to-use stand for moving your laser around your workspace, this wheeled cart is specially designed for the Fusion Edge 12 laser machine. It provides you greater versatility within your work environment and the ability to easily transport your machine to different locations.
Note: The Fusion Edge 24 is a standalone machine with a built-in pedestal.

PhotoLaser Plus Software

PhotoLaser Plus takes photo engraving with your Epilog Fusion Edge laser to the next level by easily processing photos for engraving on all types of materials. Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry.

Rim-Style Rotary Attachment

The Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The Fusion Edge rotary attachment is as easy to set up as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser.


Epilog Fusion Edge CO2 Material Compatibility

Coated Metalsx
Matte Boardxx
Mother of Pearlxx
Wood Veneerxx
Painted Metalsx
Anodized Aluminumx
Stainless Steel*
Bare Metals*
* CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page.



With an Epilog Fiber laser, mark a wide array of metals and engineered plastics.

  • 17-4 PH stainless steel
  • 303 stainless
  • 4043 steel
  • 6061 Aluminum
  • ABS (white/black)
  • Aluminum, 6061
  • Aluminum, yellow chromate
  • Bayer 2807 Makrolon polycarbonate
  • Bayers bayblend FR110
  • Black/white ABS
  • Black/white polycarbonate
  • Brass
  • Brushed aluminum
  • Carbon nanotube
  • Ceramics, metal-plated
  • Clear coat anodized aluminum
  • Cobalt chrome steel
  • Colored delrin (black/brown)
  • Compacted powder iron with phosphate coating
  • Copper
  • DAP – Diallyl Phthalate
  • Delrin, colored (black/brown)
  • GE Plastics polycarbonate resin 121-R
  • Glass filled PEEK
  • Glass filled Teflon
  • Hard coat anodized aluminum
  • Inconel metals (various)
  • Machine tool steel
  • Magnesium
  • Metal-plated ceramics
  • Molybdenum
  • Nickel plated 1215 mild steel
  • Nickel plated brass
  • Nickel plated gold
  • Nickel plated Kovar
  • Nickel plated steel
  • Nylon
  • PEEK, white
  • Polybutylene Terephthalate
  • Polycarbonate (black/white)
  • Polycarbonate resin 121-R, GE Plastics
  • Polycarbonate, Bayer 2807 Makrolon
  • Polysulphone
  • Rynite PET
  • Santoprene
  • Silicon carbide
  • Silicon steel
  • Silicone wafers
  • Stainless steel 303
  • Stainless steel 17-4 PH
  • Steel 4043
  • Steel, machine tool
  • Various inconel metals (nickel-chromium super alloys)
  • White PEEK
  • Yellow chromate aluminum
  • Zinc plated mild steel
  • And Many More!


Documentation NameView

If you have any question,
please fill in the form in the right
& send it to us.

We will respond to you in the shortest time.

Warning: Invalid argument supplied for foreach() in /home/admin/domains/namson.com.vn/public_html/wp-content/themes/namson/includes/user_tracking.php on line 34

    GỌI NGAY!!!