Nam Son - Optimal integrated laser solution for businesses
PRODUCT INTRODUTION With 5G acceleration and 165 IPS (4.2 m/s) engraving speeds, the Epilog Fusion Pro laser gantry machines provide the fastest engraving in the industry. And the powerful IRIS™…
With 5G acceleration and 165 IPS (4.2 m/s) engraving speeds, the Epilog Fusion Pro laser gantry machines provide the fastest engraving in the industry. And the powerful IRIS™ Camera Positioning system allows you to precisely place your artwork on screen in seconds.
Highest-Speed Engraving Over Largest Work AreaThe Fusion Pro’s 165 IPS (4.2 m/s) engraving speed and 5G acceleration combine to provide the fastest engraving in the industry. | |
IRIS™ Camera PositioningOverhead cameras provide an accurate picture of the working area for accurate artwork placement. Drag and drop your artwork on screen for the fastest work processing. | |
Touch Screen at the LaserSelect between jobs, auto focus the laser, and rerun jobs at the touch of a button from the easy-to-use touch screen interface right at the laser. | |
Engineered and Manufactured in the USAProudly designed, engineered, and manufactured in our Golden, CO headquarters at the base of the Rocky Mountains. | |
Network Your Laser Across Your BusinessThe Fusion Pro features built-in Ethernet and USB options for networking your laser. | |
SAFEGUARD™ FeaturesKeep the mechanics of your laser machine cleaner than ever before with side enclosures, a fully covered x-axis assembly, and covered lens assembly. | |
Air Assist and Compressor FusionThe air assist removes heat and combustible gases from the cutting surface for a cleaner cut. A built-in air compressor provides air directly to the work surface. | |
Pro engraving table – Split TableOn the Fusion Pro 48 mix and match your table across the bed with optional slat and gridded cutting tables. | |
Radiance™ Beam Enhancing OpticsNo additional, expensive lens package needed for the highest resolution engraving across the entire table. | |
CO2 Waveguide Laser Tubes by EpilogMetal/ceramic tube design provides higher beam quality and longer life with low recharge costs. | |
GB Memory in the MachineImprove job management and data integrity with 1GB of RAM in both Fusion Pro systems. Save your most run jobs right at the laser. | |
Long-Life Steel BearingA dual block design provides the most rigidity and reduced vibration without the inevitable wobble and replacement of plastic bearings. |
Fusion Pro 24 | Fusion Pro 36 | Fusion Pro 48 | |
Work Area | 24” x 24” (610 x 610 mm) | 36” x 24” (914 x 610 mm) | 48” x 36” (1219 x 914 mm) |
Maximum Z-Depth | 9” (228 mm) | 9” (228 mm) | 12.25” (311 mm) |
Laser Tube Wattage | CO2 – 60 or 80 watts
Fiber – 30 or 50 watts
Dual Source – CO2 60 watts with Fiber 30 watts | CO2 – 60 or 80 watts
Dual Source – CO2 60 or 80 watts with Fiber 30 or 50 watts | CO2 – 80 or 120 watts
Dual Source – CO2 120 watts with Fiber 50 watts |
Included Lens | 2″ – CO2 3″ – Fiber & Dual-Source | ||
Optional Lenses | 1.5″ (Pro 24 and 36 only) – CO2 4″ – CO2 | ||
Included Table | Vector Cutting Table (Grid-Style) | Task Plate | |
Air Assist Pump | Optional | Optional | Included |
Status Light | Included | n/a | |
Software | Epilog Laser Software Suite: Laser Dashboard™ & Epilog Job Manager™ | ||
Memory | Multiple files up to 1 GB. Engrave any file size. | ||
Operating Modes | Optimized Raster, Vector, and Combined modes | ||
Motion Control | High-speed, continuous-loop, brushless DC servo motors using rotary encoding technology for precise positioning | ||
X-Axis Bearings | Ground & polished stainless steel, Teflon-coated, self-lubricating bearings. Dual blocks on X-axis for greater rigidity | ||
Belts | Advanced B-style double-wide Kevlar precision drive belts. | ||
Resolution | Fully-flexible and user-controlled from 75 – 1200 dpi | ||
Speed and Power | 165 IPS (4.2m/s) with 5G acceleration. Computer-controlled in .001 increments up to 100%. Color mapping feature links Speed, Power, Frequency, and Raster/Vector mode. | ||
Print Interface | USB, Wireless, and 10Base-T Ethernet. Windows 7/8/10 compatible. | ||
Size (W x D x H) | 41.52” x 32.81” x 40.54″ 1055 x 834 x 1029 mm | 53.52” x 32.81” x 40.54″ 1359 x 834 x 1029 mm | 70.6” x 51.3″ x 42.75″ 1794 x 1304 x 1086 mm Pedestal removed: 34” H (863 mm) |
Weight | 240 lbs (108 kg) | 275 lbs (124 kg) | 650 lbs (295 kg) |
Electrical | 110 to 240 volts, 50 or 60 Hz, single phase | 240 volts, 50 or 60 Hz, single phase | |
Ventilation | 350-400 CFM (595-680 m3/hr) external exhaust to outside or internal filtration unit required. One output port, 4″ (102 mm) diameter | Three total ports. Two upper exhaust ports, one lower vacuum table port. Total 735 CFM required. All ports 4” (102mm). | |
Safety | Class 2 Laser Product – 1 mW CW Maximum 600 – 700 nm |
Dual Source Option: CO2 and FiberAre you looking for the material versatility of a CO2 laser in addition to the direct metal etching of a fiber laser? Add on the dual source option to your Fusion Pro by choosing both a CO2 laser (50, 60, or 80 watts) and a fiber laser (30 or 50 watts) to work with a wider range of materials. | |
3-Jaw Chuck Rotary AttachmentAlso available for the Fusion Pro is the 3-Jaw Chuck rotary. With this attachment, objects are clamped into the device’s 3-jaw chuck, allowing you to rotate cylindrical or oddly-shaped items in applications that demand more precise alignment. | |
Vector Cutting Table (Grid-Style)The optional grid-style vector cutting table is available for our Fusion Pro machines. Ideal for cutting applications, the vector grid limits how much of the surface area of your piece contacts the work table, reducing backside burning and providing greater air circulation while still accommodating smaller material stock. | |
Vector Cutting Table (Slat-Style)Designed for larger pieces of material, the optional slat-style vector table greatly reduces the points of contact between the material you are cutting and the work table, significantly reducing backside burning and providing optimal airflow for the removal of dust and debris. | |
Optional Lenses4.0” Lens: Cutting Thicker Materials | |
Cutting Pin TableThe Pin Table incorporates movable pins that can be placed anywhere along the table’s grid of one inch (25.4 mm) spaced holes. The movable pins also allow the user to raise and support the cutting material in locations where the laser will not be cutting, providing a means of eliminating backside reflection. The table also allows you to place pins to support parts that would normally fall out of the cutting pattern. A handy removable surface plate makes the task of cleaning up small parts easy without removing the Pin Table. | |
PhotoLaser Plus SoftwarePhotoLaser Plus takes photo engraving with your Epilog Fusion Pro laser to the next level by easily processing photos for engraving on all types of materials. Epilog Laser has partnered with CADLink to bring you the industry’s best photo processing software: PhotoLaser Plus. The easy-to-use software interface and powerful photo processing tools allow you to create the highest-quality photo engravings in the industry. | |
Rim-Style Rotary AttachmentAvailable for the Fusion Pro, the Rim-Style rotary attachment adds the ability to engrave bottles, glasses, flashlights, or any other cylindrical item. The Fusion Pro rotary attachment is as easy to setup as placing your product on the rotary, raising or lowering the scissor lift to level the engraving area, and printing to the laser. |
Epilog Fusion Pro CO2 Material Compatibility
CO2 Material Compatibility | ||
---|---|---|
Materials | Engrave | Cut |
Wood | x | x |
Acrylic | x | x |
Fabric | x | x |
Glass | x | |
Coated Metals | x | |
Ceramic | x | |
Delrin | x | x |
Cloth | x | x |
Leather | x | x |
Marble | x | |
Matte Board | x | x |
Melamine | x | x |
Mother of Pearl | x | x |
Paper | x | x |
Mylar | x | x |
Pressboard | x | x |
Rubber | x | x |
Wood Veneer | x | x |
Fiberglass | x | x |
Painted Metals | x | |
Tile | x | |
Plastic | x | x |
Cork | x | x |
Corian | x | x |
Anodized Aluminum | x | |
Stainless Steel | * | |
Brass | * | |
Titanium | * | |
Bare Metals | * | |
* CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page. |
With an Epilog Fiber laser, mark a wide array of metals and engineered plastics.
|
|
Documentation Name | View |
EPILOG FUSION PRO LASER MACHINE | CATALOG REQUEST |
Thank for your attention to EPILOG FUSION PRO LASER MACHINE. If you need get a quote, please fill in the form bellow & send it to us. We will respond within 24 hours.
If you have any question,
please fill in the form in the right
& send it to us.
We will respond to you in the shortest time.