Nam Son - Optimal integrated laser solution for businesses
GCC quickly launched the small, low-cost LaserPro C180II for new engravers, or those who want good performance, high quality with minimal investment.
Today, the trend of using small laser marking/ gantry laser machines is growing, widely used in book stores, gift shops, bakeries, etc, with limited space and budget. As a result, GCC quickly launched the small, low-cost LaserPro C180II for new engravers, or those who want good performance, high quality with minimal investment.
Compact, stylish design
GCC LaserPro C180II laser marking machine is designed to give users an enjoyable engraving experience. The overall dimensions of the machine are approximately 458 mm x 305 mm x170 mm. Underneath the stylish interior is a full 458mm – 305mm working area.
Select the power of the CO2 laser source according to the needs
C180II uses sealed CO2 laser source with power from 12 – 40 watts. At 30 watts, the GCC LaserPro C180II can cut 10mm Mica apart in one go and easily engrave materials at a depth of 100mm – 150mm in just over 1 minute. It can also deeply engrave ⅛”on wood – used to make decorations easily.
Maximum working efficiency by Closed-loop DC Servo motor
The C180 II takes advantage of the maximum working potential of close-loop DC Servo motor to help the engraving head move quickly and accurately. Combining the close-loop DC Servo mortor with the reliable DuraGuide motion system produces unmatched marking accuracy.
SmarPIN AutoFocus feature
With SmartPIN AutoFocus, uniquely designed only on GCC’s laser series, it makes focusing a one-touch process and provides the accuracy and precision required for optimum quality even on transparent materials. In particular, it can be easily and quickly inserted and removed at any time.
Unique SmartBOX feature
Along with that, SmartBOX feature is also integrated on this series, it works in conjunction with the ventilation fan to suck the material down and keep it snugly against the table top. This is a unique feature that is useful when engraving paper, foil, film or fabric that tends to ripple, curl, or move around during engraving.
Moving the engraving head is easy
And another very innovative feature found on all GCC lasers is the ability to move the engraving head to the hand-engraved starting point. (called “Drag – N – Carve”). This is a feature based on Servo Motor that simplifies operation, shortens set-up time, and is user-friendly. The user can also use a feature called SmartCENTER, which allows the user to place the top left and bottom right corners of an item into the work area, and then the laser will determine the center of the object.
The ability to manually pull the engraving head to the engraving start point or use SmartCENTER makes it simple to engrave almost anything, even strangely shaped objects that take a long time to set up.là SmartCENTER.
TrueImage image engraving feature
In addition, the GCC LaserPro C180II also features TrueImage. TrueImage depicts the images in their most vivid form using a uniquely designed laser beam algorithm.
Internal LED Lighting
Internal LED lighting illuminates the working space giving a clear view of the work in progress. Big red button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide highly safety operation.
Easy-to-use control panel
GCC LaserPro C180II engraving machine is equipped with control panel mounted on the upper right side of the cabinet and power switch mounted in the lower right. This prevents the operator from accidentally turning off the laser while working. The control panel features a four-line LCD display for simple operation and offers many of the same features as GCC’s huge Spirit GX laser engraving system.
* Specifications can be changeable without notice.
|Work Area||18 in. x12 in. (458 mm x 305 mm)|
|Max. Part Size (L x W x H)||19.8 x 12.2 x 6 in. (503 x 310 x 155 mm)|
|Table Size||20.4 in. x14.7 in. (520 mm x 375 mm)|
|Dimensions||30.7 x 29.1 x 16.1 in. (780 x 740 x 410 mm)|
|Laser Source||12 to 40 Watt Sealed CO2 Laser|
|Cooling||Air-cooled, Operating environment temperature 15°-30°C (60°-86°F)|
|Drive||Closed-loop DC Servo Control|
|Maximum Motor Speed||40 IPS|
|Speed Control||Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)|
|Power Control||Adjustable from 0~100% (Up to 16 color-linked power settings per job)|
|Engraving capability||256-level gray scale image processing capability|
|Distance Accuracy||0.254 mm or 0.1% of move. whichever is greater|
|Focus Lens||Standard 2.0″, optional 1.5″ available|
|Resolution (DPI)||Available 125, 250, 300, 380, 500, 600, 760, 1000|
|Interface||10 Base-T Ethernet|
|USB Type-A 2.0 – – For USB storage (Max. 32GB capacity, FAT file system)|
|USB Type-B 2.0 -For connecting with the computer|
|Compatible Operating Systems||MS Windows|
|Display Panel||4-line LCD panel showing current file name, total working time,|
|laser power, engraving speed, file(s) loaded into memory buffer,|
|setup and diagnostic menus.|
|Safety||Class I Laser Product Compliant with EN60825|
|Class II Laser Product Compliant with CDRH|
|2006/42/EC Machinery Directive Compliance|
|Operation Voltage||100-240VAC, 50-60Hz Auto Switching, Max. 15A|
|Fume Extraction System||External exhaust system with minimum flow rate 215m3/h (CFM 125 ft3/h) is required,|
|10kPA negative pressure (Purex GCC 400 @ 2″& 4″ exhaust port)|
A specially designed Air Compressor, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life.
Purex Fume Extraction System-C180II
GCC teams up with a UK company to offer the Purex fume extraction unit for its full-line LaserPro laser engraving and cutting systems. These Fume Extraction Systems are specifically designed to prevent personnel from inhaling hazardous fumes and dust generated during the process. Noise-free operation, high vacuum capacity, compact design and long life expectancy are just a few of its outstanding features. Powered by a maintenance-free, continuous-running turbine, the Fume Extraction System, which is CE-compliant, ensures personnel safety and legal compliance.
Entry-Level Fume Extraction System
GCC PA-1500FS & PA-1000FS, CE-certified fume extraction systems, are designed to remove the hazardous fumes and dusts during laser processing to protect the health of operators, eliminate environmental pollution and enhance the laser cutting.
SmartTRAY installation is simple, specially optimized ventilation structure and aerodynamic design. SmatTRAY ™ even provides ventilation for the air throughout the work area, directing dust into the downward ventilation system for immediate removal._x000D_
SmartTRAY ™ works best with MDF, rubber, wood, paper and other materials.
The honeycomb table is an ideal tool for laser cutting, especially when cutting materials into small pieces. It lifts the item off the work table from being hit by a laser reflection. Dust and vapors generated during laser cutting are then efficiently removed through the honeycomb cell using a vacuum exhaust. Instead of handling hard materials, the honeycomb table also helps to fix flexible materials with the help of a vacuum to keep the focusing distance constant and the cutting results consistent. This technique achieves cleaner and better cutting quality.
SmartGUARD™ Fire Alarm (Patented)
Laser cutting and engraving operation using the SmartGUARD Fire Alarm assures optimum safety. When there is a malfunction, the alarm system will be active and shut-down the operation system immediately.
The rotary attachment
The rotary attachment provides the GCC LaserPro C180II with the ability to engrave on cylindrical or spherical objects. In addition to the standard X, Y, Z axis, the rotary attachment allows for a fourth axis which rotate the object 360° to allow for engraving on cups, wine glasses, and even spherical objects. The maximum diameter and length of the to-be-engraved object is 127mm and 250mm respectively. Its maximum weight should not exceed 3kg.
|LASER GANTRY ENGRAVINGLASERPRO C180II||CATALOG REQUEST|
Thank for your attention to LASER GANTRY ENGRAVINGLASERPRO C180II. If you need get a quote, please fill in the form bellow & send it to us. We will respond within 24 hours.
If you have any quesion,
please fill in the form in the right
& send it to us.
We will respond within 24 hours.