GCC LASERPRO MERCURY III

LaserPro Mercury III – gantry laser machine carries the fine tradition of the Mercury series to provide stable engraving quality.

Details
  • Easy-to-use Control Panel
  • Pass-through Front and Rear Doors
  • Key Switch & Emergency Stop
  • Bridge Cutting
GET A QUOTE

APPLICATION

INDUSTRIES
Leather - Shoe - Garment
Watch - Gift
FUNCTION
Laser engraving
Laser cutting / laser micro cutting
MATERIAL
Leather
Fabric
Acrylic, Crystal, Paper
Wood

PRODUCT DESCRIPTION

PRODUCT INTRODUTION

LaserPro Mercury IIIgantry laser machine carries the fine tradition of the Mercury series to provide stable engraving quality. The servo motor enables fast movement of lens carriage while maintaining accuracy over time, giving you reliable and dependable results. Mercury III is reinforced with new features, including key switch, user-friendly control panel, and SmartCENTER.

FEATURES

RoHS Compliance

All GCC products are RoHS-compliant (the European Parliament Directive 2002/ 95/ EC, Restriction of Hazardous Substances) and lead-free (pb free). GCC will continue to concern and provide environmentally friendly products to protect the earth for our further generation.

Flexible 3D and Stamp Engraving

Advanced print driver with over 200 level gray scales to presents you fabulous 3D engraving output. And through the intelligent stamp engraving mode you can create a fantastic logo stamp.

Motor Closed-loop DC Servo Technology

A Closed-loop DC servo motor can deliver greater continuous shaft power at higher speeds than a stepper of the same frame size. In addition, It can also give far greater accuracy due to the continuous movement, instead of constant stopping and starting. GCC LaserPro high speed closed-loop DC servo motor technology guarantees precise and fast carriage movement with exceptionally accurate outputs.

 

Bridge Cutting 

Bridge Cutting function diversifies the laser cutting into packaging prototyping and fulfill versatile requirements. Define the cutting gap to create the dashed line effect from user friendly print driver interface.

Key Switch & Emergency Stop

Key switch safeguards the machine from unauthorized use. Prominent emergency button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a safe operating environment.

Easy-to-use Control Panel 

Designed for simplifying complex tasks, the GCC LaserPro X380’s user-friendly interface is a great facilitator to provide powerful function settings.

Pass-through Front and Rear Doors (Optional)

A design with doors on both ends to accommodate extremely long working pieces without the need for a screwdriver.

Job Preview Function

The GCC LaserPro laser engraver all series printer driver features a job preview function that previews graphics before the official laser printing process. One of the highlights of this feature is that it provides an estimated working time*.
The estimated working time is an easy tool for operators to know in advance as how much time will be needed to finish the job for better job management; it is also convenient for a shop to provide a quotation for its laser services.

AutoFocus (Patented)

Patented Autofocus Gauge adjusts the laser engraver to the precise focal point on the engraving area automatically. The Autofocus is the most effective lens-focusing tool that prevents human error when exact measurement of distance from the surface of the working material is needed.

Drag and Play

An exceptionally innovative and user-friendly feature based on servomotor technology simplifies operations and shortens setup time. Simply hand drag the lens carriage to the desired position to be engraved and press the start button to commence job.


SPECIFICATION

*The specifications can be changeable.

Mercury III
Max. Part Size
(L x W x H) 
All doors closed 27 x 19 x 6.5 in. (685 x 482 x 165 mm)
All doors open 27 x ∞ x 6.5 in. (685 x ∞ x 165 mm)
Table Size 31.1 x 20.9 in. (790 x 530 mm)
Dimensions  44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
Laser Source 12, 30, 40, 60W
Cooling Air-cooled, Operating environment temperature 15°- 30°C (60°- 86°F)
Drive Closed-loop DC Servo Control
Speed Control Adjustable from 0.1~100% of 42 IPS
(Up to 16 color-linked speed settings per job)
Power Control Adjustable from 1-100% (Up to 16 color-linked power settings per job)
Engraving capability 256-level gray scale image processing capability
Distance Accuracy 0.254mm or 0.1% of move, whichever is greater
Z-Axis Movement Automatic
Focus Lens Standard 2.0″, optional 1.5″, 2.5″ & 4.0″ available
Resolution (DPI) Available125, 250, 300, 380, 500, 600,760,1000, 1500
Interface 10 Base-T Ethernet
USB Type-A 2.0
 – For USB storage (Max. 32GB capacity, FAT file system)
USB Type-B 2.0
 – For connecting with the computer
Compatible Operating Systems MS Windows
Display Panel 4-line LCD panel showing current file name, total working time,
laser power, engraving speed, file(s) loaded into memory buffer,
setup and diagnostic menus.
Safety Class I Laser Product Compliant with EN60825
Class II Laser Product Compliant with CDRH
2006/42/EC Machinery Directive Compliance
Class 4 Laser Product Compliant with CDRH with the optional pass-through door module
Auto Focus V
Red Dot Pointer V
Pass Through Doors V
3D and Stamp Mode V
Operation Voltage 100-240VAC, 50-60Hz Auto Switching, Max. 15A
Fume Extraction System External exhaust system with minimum flow rate 640m3/h (CFM 377 ft3/h) is required,2.3kPA negative pressure (Pure-Air PA-1000FS @ 4″ exhaust port)

OPTIONALS/FACILITY REQUIREMENTS

SmartPRINT ™

The GCC LaserPro SmartPRINT™ software features powerful functions, an intuitive interface and embedded GCC LaserPro laser parameter setting for both MAC and Windows users. Currently, this new optional solution is compatible with GCC Spirit Series, VenusII, C180II, MercuryIII, S290LS and MG380Hybrid laser engravers. And GCC X Series and T500 laser cutters, more laser models are expected to join the line in the near future.
SmartPRINT™ will run in trial mode and will cut a horizontal lines through your design as a DEMO watermark until you purchase a license. Trial will expire after 15 days.
You can activate SmartPRINT™ on up to two computers.

Entry-Level Fume Extraction System

GCC PA-1500FS & PA-1000FS, CE-certified fume extraction systems, are designed to remove the hazardous fumes and dusts during laser processing to protect the health of operators, eliminate environmental pollution and enhance the laser cutting.

Rotary Attachment

Allows the laser system to perform at another level! By using the rotary attachment, engraving on cylindrical or round objects is now possible. This option uses a fourth axis to rotate your object 360° to allow engraving on cups, wine glasses or even a baseball with two types of conical fixture available. The minimum/maximum diameter and length of the working object is 90/180mm and 450mm respectively. Its maximum weight should not exceed 4kgs.

External Interface Control Board

The External Control Interface Board is an optional item that allows users to set up GCC laser machines for communication with external devices such as odor reduction units, robot arms and others via a 5V or 12V signal to form an automatic production line. Another useful practice applies in certain working environments when users are required to set up an extra remote interlock control or when laser machines are allowed to be switched off if a security device is triggered.

 

SmartAIR™ Fine Nozzle

The optional SmartAIR Fine Nozzle is recommended for engraving or cutting thin materials such as textile. The smaller caliber nozzle is positioned closer to the object for a concentrated blast directed over a small area to eliminate burning on the cutting edge. The perfectly-vertical design of the SmartAIR Fine Nozzle produces a concentrated airflow to blow away dust and unwanted residue, leaving a clean product surface.

 

Purex Fume Extraction System

GCC teams up with a UK company to offer the Purex fume extraction unit for its full-line LaserPro laser engraving and cutting systems. These Fume Extraction Systems are specifically designed to prevent personnel from inhaling hazardous fumes and dust generated during the process. Applicable to all GCC LaserPro engravers, the Purex Fume Extraction System represents the latest invention in the exhaust extraction and smoke reduction technology for all types of applications. Noise-free operation, high vacuum capacity, compact design and long life expectancy are just a few of its outstanding features. Powered by a maintenance-free, continuous-running turbine, the Fume Extraction System, which is CE-compliant, ensures personnel safety and legal compliance.

Air Compressor

A specially designed Air Compressor, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life.

SmartGUARD

SmartGUARD™ Fire Alarm (Patented)

Laser cutting and engraving operation using the SmartGUARD Fire Alarm assures optimum safety. When there is a malfunction, the alarm system will be active and shut-down the operation system immediately.

Honeycomb Table

The honeycomb table is an ideal tool for laser cutting, especially when cutting materials into small pieces. It lifts the work piece off the work table from hitting by laser reflection while supports it with honeycomb cell design.

The dust and vapor created during laser cutting are then taken away effectively through the honeycomb cell by down vacuum funnel exhaust.

Rather than handling rigid materials, honeycomb table also helps to fix flexible materials with the aid of down vacuum to keep constant focus distance and consistent cutting result. A clean and better cutting quality is achieved from this technique.

APPLICATIONS

  • Engraving
  • Cutting

CATALOGUE

Documentation Name View
GCC LASERPRO MERCURY III CATALOG REQUEST

CONTACT INFORMATION

If you have any quesion,
please fill in the form in the right
& send it to us.

We will respond within 24 hours.



    Call Now Button