Nam Son - Optimal integrated laser solution for businesses
Gantry Laser GCC LaserPro S290LS delivers an easy to operate DPSS laser marking system which yields spectacular marking results.
Gantry Laser GCC LaserPro S290LS delivers an easy to operate DPSS laser marking system which yields spectacular marking results, including the S290LS. GCC LaserPro S290LS laser marking machine is designed for excellent performance and output quality. Moreover, with improved user-friendly features created by an experienced manufacturer, the S290LS industrial laser marking machine will be one of the most perfect options for you on the market.
GCC LaserPro S290LS is designed with front and back doors that connect to each other so that the machine can engrave on oversized materials. Along with that, the upper door opening system is designed for an improved, easy to disassemble the internal components of the machine for convenient maintenance operations.
DC Servo kín Maximum working efficiency by Closed-loop DC Servo motor
The S290LS takes advantage of the maximum working potential of close-loop DC Servo motor to help the engraving head move quickly and accurately. CCombining the close-loop DC Servo mortor with the reliable DuraGuide motion system produces unmatched marking accuracy.
Moving the engraving head is easy
And another very innovative feature found on all GCC lasers is the ability to move the engraving head to the hand-engraved starting point. (called “Drag – N – Carve”). This is a feature based on Servo Motor that simplifies operation, shortens set-up time, and is user-friendly.
The user can also use a feature called SmartCENTER, which allows the user to place the top left and bottom right corners of an item into the work area, and then the laser will determine the center of the object. The ability to manually pull the engraving head to the engraving start point or use SmartCENTER makes it simple to engrave almost anything, even strangely shaped objects that take a long time to set up.
Easy-to-use control panel
GCC LaserPro S290LS is equipped with control panel mounted on the upper right side of the cabinet and power switch mounted in the lower right. This prevents the operator from accidentally turning off the laser while working. The control panel features a four-line LCD display for simple operation and offers many of the same features as GCC’s huge Spirit GX laser engraving system.
Key Switch & Emergency Stop
Key switch safeguards the machine from unauthorized use. Prominent emergency button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide a safe operating environment.
Internal LED Lighting
Internal LED lighting illuminates the working space giving a clear view of the work in progress. Big red button located on the top of the machine allows operators to stop the laser and the motion carriage immediately to provide highly safety operation.
* Các * Specifications can be changeable without notice.
|Laser Source||Fiber laser: 20 / 30 / 60W|
|Beam Quality (M²)||1064 nm|
|Laser Peak Power (kW)||>7||>4.5||>5.5||>7.8|
|Work Area||25 x 18 in. (640 x 460 mm) extendable to 29 x 18 in. (740 x 460 mm)|
|Max. Part Size|
(L x W x H)
|All doors closed||31.5 x 22.4 x 6.5 in. (800 x 570 x 165 mm)|
|All doors open||31.5 x ∞ x 6.5 in. (800 x ∞ x 165 mm)|
|Table Size||31.1 x 20.9 in. (790 x 530 mm)|
|Dimensions||44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)|
|Drive||Closed-loop DC Servo Control|
|Maximum Motor Speed*||80 IPS|
|Speed Control||Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)|
|Power Control||Adjustable from 0~100% (Up to 16 color-linked power settings per job)|
|Engraving capability||256-level gray scale image processing capability|
|Distance Accuracy||0.254 mm or 0.1% of move, whichever is greater|
|Focus Lens||Standard 4.0″, optional 2.0″ available|
|Resolution (DPI)||Available 125, 250, 300, 380, 500, 600, 760, 1000, 1500, 3000|
|Computer Interface||10 Base-T Ethernet, Full speed 2.0 USB|
|Display Panel||4-line LCD display showing current file name, total working time, laser power, engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus|
|Safety||Class I Laser Product Compliant with EN60825|
Class 3R Laser Product Compliant with CDRH
2006/42/EC Machine Directive Compliance
Class 4 Laser Product Compliant with CDRH with the optional pass-through door module
|Operation Voltage||100V-240VAC, 50/60Hz Auto switching, MAX. 8A|
|Fume Extraction System||External exhaust system with minimum flow rate 640m3/h (CFM 377 ft3/h) is required,|
2.3kPA negative pressure (Pure-Air PA-1000FS @ 4″ exhaust port)
A specially designed Air Compressor, by using an oil-less diaphragm, you help eliminate the harmful and damaging side effects of moisture on the laser optics. Also, provides the optimal air pressure your laser needs to blow away vaporized particles and helps prevents overheating. A must to keep lenses and mirrors clean to promote longer laser life.
SmartAIR™ Fine Nozzle
The optional SmartAIR Fine Nozzle is recommended for engraving or cutting thin materials such as textile. The smaller caliber nozzle is positioned closer to the object for a concentrated blast directed over a small area to eliminate burning on the cutting edge. The perfectly-vertical design of the SmartAIR Fine Nozzle produces a concentrated airflow to blow away dust and unwanted residue, leaving a clean product surface.
Entry-Level Fume Extraction System
GCC PA-1500FS & PA-1000FS, CE-certified fume extraction systems, are designed to remove the hazardous fumes and dusts during laser processing to protect the health of operators, eliminate environmental pollution and enhance the laser cutting.
The honeycomb table is an ideal tool for laser cutting, especially when cutting materials into small pieces. It lifts the item off the work table from being hit by a laser reflection. Dust and vapors generated during laser cutting are then efficiently removed through the honeycomb cell using a vacuum exhaust. Instead of handling hard materials, the honeycomb table also helps to fix flexible materials with the help of a vacuum to keep the focusing distance constant and the cutting results consistent. This technique achieves cleaner and better cutting quality.
SmartGUARD™ Fire Alarm (Patented)
Laser cutting and engraving operation using the SmartGUARD Fire Alarm assures optimum safety. When there is a malfunction, the alarm system will be active and shut-down the operation system immediately.
Rotary Chuck – S290LS/FMC280
Handy rotary chuck to work with cylindrical metal objects like pipes, engineering parts, and even spherical objects with tilt angle. In addition to the standard X, Y, Z axis, the rotary Chuck allows for a fourth axis which rotates the object 360° to allow for engraving and cutting on spherical objects. The diameter range of the to-be-engraved object is 0.5mm to 120mm and the max. length of the object is 410mm. Its maximum weight should not exceed 4kgs.
Engraving materials such as:
|LASER GANTRY GCC LASERPRO S290LS||CATALOG REQUEST|
Thank for your attention to GANTRY LASERS GCC LASERPRO S290LS. If you need get a quote, please fill in the form bellow & send it to us. We will respond within 24 hours.
If you have any quesion,
please fill in the form in the right
& send it to us.
We will respond within 24 hours.